000 07860nam a2200697 i 4500
001 6813076
003 IEEE
005 20200413152847.0
006 m eo d
007 cr cn |||m|||a
008 081013s2007 caua foab 001 0 eng d
020 _a1598291637 (electronic bk.)
020 _a9781598291636 (electronic bk.)
020 _a1598291629 (pbk.)
020 _a9781598291629 (pbk.)
024 7 _a10.2200/S00072ED1V01Y200612DCS010
_2doi
035 _a(OCoLC)86085073
035 _a(CaBNVSL)gtp00531456
040 _aCaBNVSL
_cCaBNVSL
_dCaBNVSL
050 4 _aTK5103.7
_b.T636 2007
082 0 4 _a621.382
_222
090 _a
_bMoCl
_e200612DCS010
100 1 _aTobin, Paul,
_d1948-
245 1 0 _aPSpice for digital communications engineering
_h[electronic resource] /
_cPaul Tobin.
250 _a1st ed.
260 _aSan Rafael, Calif. (1537 Fourth Street, San Rafael, CA 94901 USA) :
_bMorgan & Claypool Publishers,
_cc2007.
300 _a1 electronic text (xiii, 199 p. : ill.) :
_bdigital file.
490 1 _aSynthesis lectures on digital circuits and systems,
_x1932-3174 ;
_v#10
538 _aMode of access: World Wide Web.
538 _aSystem requirements: Adobe Acrobat Reader.
500 _aPart of: Synthesis digital library of engineering and computer science.
500 _aSeries from website.
504 _aIncludes bibliographical references (p. 189) and index.
505 0 _aFourier analysis, signals, and bandwidth -- Digital signals -- Bandwidth -- Pulse spectra for different pulse widths and period -- Average and RMS pulse power -- Unsynchronizing probe-plot axis -- Fourier transform -- Fourier series analysis -- The vector part -- Exercise -- Baseband transmission techniques -- Baseband signals -- Baseband signal formats -- Non-return to zero (NRZ) coding -- FileStim generator -- NRZ-B -- RZ encoding and decoding -- RZ to NRZ decoder -- Manchester encoding and decoding -- Manchester unipolar to bipolar encoding -- Manchester (biphase) decoding -- Differential Manchester coding -- Alternate mark inversion encoding -- AMI decoding -- DUO-binary baseband signaling -- Use of a precoder in duo-binary signaling -- Integrate and dump matched filter baseband receiver -- Sampling and pulse code modulation -- Single-channel pulse code modulation -- Companding characteristics -- Sampling -- Sallen and key antialiasing active filter -- Speech signals -- Sample and hold -- Quantization noise -- Analog to digital conversion -- DAC resolution -- Band-stop filter -- Pulse code modulation -- Universal shift register -- 74194 universal shift register -- Single-channel 4-bit PCM transmitter -- Time-division multiplexing and demultiplexing -- Time-division multiplexing of two PAM signals -- Linear delta modulation -- Delta demodulation -- Exercises -- Passband transmission techniques -- Baseband to passband -- Amplitude shift keying -- Frequency shift keying -- Frequency shift keying spectrum -- FSK receiver -- Infinite gain multiple feedback active filter -- Phase shift keying -- PSK receiver -- Differential phase shift keying (DPSK) -- Differential phase shift receiver -- Exercises -- Multilevel signaling and bandwidth efficiency -- Channel capacity -- Multilevel encoding: bandwidth efficiency -- Bit error rate -- Quadrature phase shift keying -- QPSK modulation using ABM parts -- QPSK modulation using a bit-splitter -- QPSK receiver -- Offset quadrature phase shift keying -- Gaussian minimum shift keying -- Eight-PSK -- Quadrature amplitude Modulation -- Eight-QAM -- Comparison of PSK and QAM -- Sixteen-quadrature amplitude modulation -- Two-to-four level conversion -- Clock extraction -- Costas loop -- Exercises -- System performance and test instruments -- Noise generator -- Eye diagram -- The eye meter -- Eye diagram application -- Vector/scatter diagram -- Noisy QPSK scatter diagram -- Noisy 16-QAM scatter diagram -- Clock with Jitter -- Intersymbol interference -- Nyquist signal criterion -- Raised cosine filter -- Square root-raised cosine filter -- Raised cosine filter response -- Transmitter and receiver filter impulse response -- Example -- Solution -- Errors, noise, and matched filters -- Importing noise into a schematic -- Gaussian noise distribution plot using a macro -- Example -- Bit error rate (BER) -- Channel capacity -- Channel capacity for different M-ary levels -- BER performance for a range of Eb/N0 ratios -- Cyclic redundancy check -- Exercises -- Direct sequence spread spectrum systems -- Spread spectrum -- Pseudorandom binary sequence properties -- PRBS generator -- Vector part -- PRBS applications -- Direct sequence spread spectrum transmitter -- STIM generator part -- DSSS transmitter -- Spread spectrum receiver -- Adding noise to the received signal -- Frequency-hopping spread spectrum -- Multiplexer -- PRBS -- Exercise.
506 1 _aAbstract freely available; full-text restricted to subscribers or individual document purchasers.
510 0 _aCompendex
510 0 _aINSPEC
510 0 _aGoogle scholar
510 0 _aGoogle book search
520 _aPSpice for Digital Communications Engineering shows how to simulate digital communication systems and modulation methods using the very powerful Cadence Orcad PSpice version 10.5 suite of software programs. Fourier series and Fourier transform are applied to signals to set the ground work for the modulation techniques introduced in later chapters. Various baseband signals, including duo-binary baseband signaling, are generated and the spectra are examined to detail the unsuitability of these signals for accessing the public switched network. Pulse code modulation and time-division multiplexing circuits are examined and simulated where sampling and quantization noise topics are discussed. We construct a single-channel PCM system from transmission to receiver i.e. end-to-end, and import real speech signals to examine the problems associated with aliasing, sample and hold. Companding is addressed here and we look at the A and mu law characteristics for achieving better signal to quantization noise ratios. Several types of delta modulators are examined and also the concept of time division multiplexing is considered. Multi-level signaling techniques such as QPSK and QAM are analyzed and simulated and 'home-made meters', such as scatter and eye meters, are used to assess the performance of these modulation systems in the presence of noise. The raised-cosine family of filters for shaping data before transmission is examined in depth where bandwidth efficiency and channel capacity is discussed. We plot several graphs in Probe to compare the efficiency of these systems. Direct spread spectrum is the last topic to be examined and simulated to show the advantages of spreading the signal over a wide bandwidth and giving good signal security at the same time.
530 _aAlso available in print.
588 _aTitle from PDF t.p. (viewed on October 13, 2008).
630 0 0 _aPSpice.
650 0 _aDigital communications
_xComputer simulation.
690 _aFourier series and Fourier transforms.
690 _aBaseband and passband modulation.
690 _aPulse code modulation.
690 _aTime-division multiplexing.
690 _aQuantization noise.
690 _aM-ary signaling.
690 _aQPSK.
690 _aQAM.
690 _aEyemeter.
690 _aScatter diagrams.
690 _aSpread spectrum.
690 _aRaised cosine filter.
730 0 _aSynthesis digital library of engineering and computer science.
830 0 _aSynthesis lectures on digital circuits and systems ;
_v#10.
856 4 2 _3Abstract with links to resource
_uhttp://ieeexplore.ieee.org/servlet/opac?bknumber=6813076
856 4 0 _3Abstract with links to full text
_uhttp://dx.doi.org/10.2200/S00072ED1V01Y200612DCS010
999 _c561556
_d561556