PKK Library Search for 'se,phr:" Multidisciplinary Center for Earthquake Engineering Research [MCEER] "'

Development of analysis and design procedures for spread footings

Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2002 . 245p , This research was conducted at the City University of New York and the University at Buffalo, State University of New York and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00112.

Place Hold on Development of analysis and design procedures for spread footings

Liquefaction remediation in silty soils using dynamic compaction and stone columns

Buffalo, New York MCEER 2006 . xi, 101p , Task Number 094-E-2.1

Place Hold on Liquefaction remediation in silty soils using dynamic compaction and stone columns

Scissor-jack damper energy dissipation system

By Sigaher-Boyle, Ani N.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2004 . xv, 244p , Task Number 6.2.2, Earthquake Engineering to Extreme Events

Place Hold on Scissor-jack damper energy dissipation system

Experimental and analytical studies of structures seismically isolated with an uplift-restraint isolation system

By Roussis, Panayiotis C. . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xv, 144p , Task Number 2.4a and 03/2.2 , Earthquake Engineering to Extreme Events

Place Hold on Experimental and analytical studies of structures seismically isolated with an uplift-restraint isolation system

Assessment of performance of bolu viaduct in the 1999 duzce earthquake in Turkey

Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2002 . 245p , This research was conducted at the University at Buffalo, State University of New York and was -supported by the Federal Highway Administration under contract number DTFH61-98-C-00094.

Place Hold on Assessment of performance of bolu viaduct in the 1999 duzce earthquake in Turkey

Experimental investigation and retrofit of steel pile foundations and pile bents under cyclic lateral loadings

Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2001 . 237p , This research was conducted at the University at Buffalo, State University of New York and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106.

Place Hold on Experimental investigation and retrofit of steel pile foundations and pile bents under cyclic lateral loadings

Updating real-time earthquake loss estimates: methods, problems and insights

By Taylor, Craig E. . Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2001 . 53p , This research was conducted at Natural Hazards Management, Inc., University of Washington and ImageCat, Inc., and was supported primarily by the Earthquake Engineering Research Centers Program of the National Science Foundation under award number EEC-9701471.

Place Hold on Updating real-time earthquake loss estimates: methods, problems and insights

Seismic retrofit of bridge steel truss piers using a controlled rockingapproach

By Pollino, Michael. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2004 . xxvi, 220p , Task Number 094-C-3.3, Earthquake Engineering to Extreme Events

Place Hold on Seismic retrofit of bridge steel truss piers using a controlled rockingapproach

A versatile experimentation model for study of structures near collapse applications to seismic evaluation of irregular structures

By Kusumastuti, Dyah. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2004 . xxii, 258p , Task Numbers 01-2041, 02-2041 and 03.2.6

Place Hold on A versatile experimentation model for study of structures near collapse applications to seismic evaluation of irregular structures

Sensitivity analysis of dynamic systems subjected to seismic loads

By Roth, Christopher . Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2001 . 225p , This research was conducted at Cornell University and was supported primarily by the Earthquake Engineering Research Centers Program of the National Science Foundation under award number EEC-9701471.

Place Hold on Sensitivity analysis of dynamic systems subjected to seismic loads

Approaches for the seismic retrofit of braced steel bridge piers and proofof-concept testing of an eccentrically braced frame with tubular link

By Berman, Jeffrey W.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xxiii, 144p , NICEE

Place Hold on Approaches for the seismic retrofit of braced steel bridge piers and proofof-concept testing of an eccentrically braced frame with tubular link

Behavior of underground piping joints due to static and dynamic loading

By Meis, Ronald D.. Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2003 . 135p , This research was conducted at the University of Nevada at Reno and was supported primarily by the Earthquake Engineering Research Centers Program of the National Science Foundation under award number EEC-9701471.

Place Hold on Behavior of underground piping joints due to static and dynamic loading

Urban disaster recovery: a framework and simulation model

By Miles, Scott B. . Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2003 . 107p , This research was conducted at the University of Washington and was supported primarily by the Earthquake Engineering Research Centers Program of the National Science Foundation under award number EEC-9701471.

Place Hold on Urban disaster recovery: a framework and simulation model

Simulation of strong ground motions for seismic fragility evaluation of nonstructural components in hospitals

By Wanitkorkul, Assawin. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xiii, 192p , Task Number 8.2.1.4 , Multidisciplinary Center for Earthquake Engineering Research

Place Hold on Simulation of strong ground motions for seismic fragility evaluation of nonstructural components in hospitals

Seismic safety in California hospitals

By Alesch, Daniel J. . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xiii, 90p , Task Number 4-2011 , Earthquake Engineering to Extreme Events, Multidisciplinary Center for Earthquake Engineering Research

Place Hold on Seismic safety in California hospitals

Development of seismic strengthening and retrofit strategies for critical facilities using engineered cementitious composite materials.

By Kesner, Keith. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xvii, 210p , Earthquake Engineering to Extreme Events, Multidisciplinary Center for Earthquake Engineering Research

Place Hold on Development of seismic strengthening and retrofit strategies for critical facilities using engineered cementitious composite materials.

Experimental and analytical studies of base isolation for seismicprotection of power transformers

By Murota, Nobuo. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xviii, 226p , Earthquake Engineering to Extreme Events, Multidisciplinary Center for Earthquake Engineering Research

Place Hold on Experimental and analytical studies of base isolation for seismicprotection of power transformers

3D-BASIS-ME-MB: computer program for nonlinear dynamic analysis of seismically isolated structures

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xiv, 196p

Place Hold on 3D-BASIS-ME-MB: computer program for nonlinear dynamic analysis of seismically isolated structures

3D-BASIS-ME-MB

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xiv, 196p , NICEE

Place Hold on 3D-BASIS-ME-MB

Steel plate shears walls for seismic design and retrofit of buildingstructures

By Vian, Darren. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xxxi, 328p , Task Number 8.2.2, Earthquake Engineering to Extreme Events

Place Hold on Steel plate shears walls for seismic design and retrofit of buildingstructures

The performance-based design paradigm

By Astrella, Michael J. . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xv, 141p , Earthquake Engineering to Extreme Events

Place Hold on The performance-based design paradigm

The performance-based design paradigm

By Astrella, Michael J. . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xv, 141p , Earthquake Engineering to Extreme Events

Place Hold on The performance-based design paradigm

Multi-dimensional fragility of structures

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xiii,147p , Earthquake Engineering to Extreme Events

Place Hold on Multi-dimensional fragility of structures

Seismic fragility of suspended ceiling systems

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xxv, 225p , Earthquake Engineering to Extreme Events

Place Hold on Seismic fragility of suspended ceiling systems

Built-up shear links as energy dissipaters for seismic protection of bridges

By Dusicka, Peter. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xix, 233p , Earthquake Engineering to Extreme Events

Place Hold on Built-up shear links as energy dissipaters for seismic protection of bridges

Analytical investigation of the structural fuse concept

By Vargas, Ramiro E.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xxi, 365p , Earthquake Engineering to Extreme Events

Place Hold on Analytical investigation of the structural fuse concept

Further development of tubular eccentrically braced frame links for the seismic retrofit of braced steel truss bridge piers

By Berman, Jeffrey W.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xxx, 289p , Earthquake Engineering to Extreme Events

Place Hold on Further development of tubular eccentrically braced frame links for the seismic retrofit of braced steel truss bridge piers

Seismic retrofitting guidelines for complex steel truss highway bridges

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xiii, 174p , Earthquake Engineering to Extreme Events

Place Hold on Seismic retrofitting guidelines for complex steel truss highway bridges

Experimental investigation of the structural fuse concept

By Vargas, Ramiro E.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xv, 193p , Earthquake Engineering to Extreme Events

Place Hold on Experimental investigation of the structural fuse concept

REDARS validation report

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xiii, 174p , Task Number 094-B-1.1 Risk of Earthquake Damage for Roadway Systems [REDARS], Earthquake Engineering to Extreme Events, U. S. Department of Transportation Federal Highway Administration

Place Hold on REDARS validation report

Seismic analysis and design of special bridges

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2006 . vii, 395p

Place Hold on Seismic analysis and design of special bridges

Conceptual design and experimental investigation of polymer matrix composite infill panels for seismic retrofitting

By Jung, Wooyoung. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 2006 . xxvii, 321p , Earthquake Engineering to Extreme Events

Place Hold on Conceptual design and experimental investigation of polymer matrix composite infill panels for seismic retrofitting

Cyclic response and low cycle fatigue characteristics of plate steels

By Dusicka, Peter . New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2006 . xiii, 69p

Place Hold on Cyclic response and low cycle fatigue characteristics of plate steels

REDARS 2 methodology and software for seismic risk analysis of highway systems

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xx, 123p , Earthquake Engineering to Extreme Events

Place Hold on REDARS 2 methodology and software for seismic risk analysis of highway systems

Review of current NDE technologies for post-earthquake assessment of retrofitted bridge columns

By Song, Jianwei. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 2006 . xii, 95p , Earthquake Engineering to Extreme Events

Place Hold on Review of current NDE technologies for post-earthquake assessment of retrofitted bridge columns

User manual and technical documentation for the REDARS (TM) Import Wizard

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2006 . xi, 123p

Place Hold on User manual and technical documentation for the REDARS (TM) Import Wizard

Static and kinetic coefficients of friction for rigid blocks

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xiii, 89p

Place Hold on Static and kinetic coefficients of friction for rigid blocks

REDARS 2 methodology and software for seismic risk analysis of highway systems

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2006 . xx, 123p , Earthquake Engineering to Extreme Events

Place Hold on REDARS 2 methodology and software for seismic risk analysis of highway systems

REDARS 2 methodology and software for seismic risk analysis of highway systems.

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 2006 . xx, 123p

Place Hold on REDARS 2 methodology and software for seismic risk analysis of highway systems.

Hazard mitigation investment decision making

By Arendt, Lucy A. . New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xi, 81p

Place Hold on Hazard mitigation investment decision making

Seismic analysis and design of special bridges

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xiii, 202p , A National Center of Excellence in Advanced Technology Applications

Place Hold on Seismic analysis and design of special bridges

Design and retrofit methodology for building structures with supplemental energy dissipating systems

By Pekcan, Gokhan . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . xvii, 177p , This research was conducted at the University at Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. CMS 96-16624

Place Hold on Design and retrofit methodology for building structures with supplemental energy dissipating systems

Cyclic testing of braces laterally restrained by steel studs to enhance performance during earthquakes

By Celik, Oguz C. . Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2004 . 145p , This research was conducted at the University at Buffalo, State University of New York and was supported primarily by the Earthquake Engineering Research Centers Program of the National Science Foundation under award number EEC-9701471.

Place Hold on Cyclic testing of braces laterally restrained by steel studs to enhance performance during earthquakes

Seismic behavior of bidirectional-resistant ductile end diaphragms with unbonded braces in straight or skewed steel bridges

By Celik, Oguz C. .

Place Hold on Seismic behavior of bidirectional-resistant ductile end diaphragms with unbonded braces in straight or skewed steel bridges

Seismic behavior of bidirectional-resistant ductile end diaphragms with unbonded braces in straight or skewed steel bridges

By Celik, Oguz C. . New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xxv, 177p

Place Hold on Seismic behavior of bidirectional-resistant ductile end diaphragms with unbonded braces in straight or skewed steel bridges

Modeling pile behavior in large pile groups under lateral loading

By Dodds, Andrew M.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xvii, 274p

Place Hold on Modeling pile behavior in large pile groups under lateral loading

Methodologies for post-earthquake building damage detection using SAR and optical remote sensing

Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2004 . 168p , NICEE

Place Hold on Methodologies for post-earthquake building damage detection using SAR and optical remote sensing

Development of measurement capability for micro-vibration evaluation with application to chip fabrication facilities

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . xiii, 129p , This research was conducted at the University at Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. CMS 97-01471 and other sponsors.

Place Hold on Development of measurement capability for micro-vibration evaluation with application to chip fabrication facilities

Earthquake resistant design of lifeline facilities and countermeasures against soil liquefaction

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 1999 . xii, 661p , This workshop was held at the August 15-17, 1999 at the sheraton hotel and towers Seattle, Washington and was supported by the National Science Foundation under Grant No. CMS 97-01471.

Place Hold on Earthquake resistant design of lifeline facilities and countermeasures against soil liquefaction

Earthquake resistant design of lifeline facilities and countermeasures against soil liquefaction

Place Hold on Earthquake resistant design of lifeline facilities and countermeasures against soil liquefaction

Nonlinear structural analysis towards collapse simulation: a dynamical systems approach

By Sivaselvan, Mettupalayam V.. Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2004 . 186p , This research was conducted at the University at Buffalo, State University of New York and was supported primarily by the Earthquake Engineering Research Centers Program of the National Science Foundation under award number EEC-9701471

Place Hold on Nonlinear structural analysis towards collapse simulation: a dynamical systems approach

Earthquake resistant design of lifeline facilities and countermeasures against soil liquefaction

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . xii, 661p , This workshop was held at the August 15-17, 1999 at the Sheraton hotel and Towers Seattle, Washington and was supported by the National Science Foundation under Grant No. CMS 97-01471.

Place Hold on Earthquake resistant design of lifeline facilities and countermeasures against soil liquefaction

Seismic vulnerability evaluation of axially loaded steel built-up laced members

By Lee, Kangmin. Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2004 . xxi, 302p , This research was conducted at the University at Buffalo, State University of New York and was supported by the Federal Highway Administration under contract number DTFH61-98-C-00094.

Place Hold on Seismic vulnerability evaluation of axially loaded steel built-up laced members

Hysteretic models for cyclic behavior of deteriorating inelastic structures

By Sivaselvan, M. V. . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 1999 . xvii, 177p , This research was conducted at the University at Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. CMS 97-01471 and other sponsors.

Place Hold on Hysteretic models for cyclic behavior of deteriorating inelastic structures

Guide to remedial measures for liquefaction mitigation at existing highway bridge sites

By Cooke, Harry G.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . xvii, 162p , This research was conducted at Virginia Polytechnic Institute and State University and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106.

Place Hold on Guide to remedial measures for liquefaction mitigation at existing highway bridge sites

Experimental investigation of blast performance of seismically resistant concrete-filled steel tube bridge piers

By Fujikura, Shuichi. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xxvii, 184p

Place Hold on Experimental investigation of blast performance of seismically resistant concrete-filled steel tube bridge piers

Assessment of geotechnical issues in acute care facilities in California

Buffalo Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2004 . 128p , This research was conducted at MACTEC Engineering and Consulting, Inc., Cornell University and Rensselaer Polytechnic Institute and was supported primarily by the Earthquake Engineering Research Centers Program of the National Science Foundation under award number EEC-9701471.

Place Hold on Assessment of geotechnical issues in acute care facilities in California

Ground motion methodologies for the Eastern United States

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . vii, 105p , This workshop was held at the August 15-17, 1999 at the Sheraton four points hotel, Memphis,Tennessee and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106.

Place Hold on Ground motion methodologies for the Eastern United States

Seismic retrofit of end-sway frames of steel deck-truss bridges with a supplemental tendon system: experimental and analytical investigation

By Pekcan, Gokhan . Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . various pagings , This research was conducted at the University at Buffalo, State University of New York, and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106.

Place Hold on Seismic retrofit of end-sway frames of steel deck-truss bridges with a supplemental tendon system: experimental and analytical investigation

Sliding fragility of unrestrained equipment in critical facilities

By Chong, W. H.. Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . 125p , This research was conducted at the University at Buffalo, State University of New York, and was supported primarily by the Earthquake Engineering Research Centers Program of the National Science Foundation under award number EEC-9701471.

Place Hold on Sliding fragility of unrestrained equipment in critical facilities

Experimental seismic performance evaluation of isolation/restraint systems for mechanical equipment [Part 1]

By Fathali, Saeed. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xvi, 158p

Place Hold on Experimental seismic performance evaluation of isolation/restraint systems for mechanical equipment [Part 1]

Low cycle fatique behavior of longitudinal reinforcement in reinforced concrete bridge columns

By Brown, Jeff . Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . 109p , This research was conducted at the University of Central Florida and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106.

Place Hold on Low cycle fatique behavior of longitudinal reinforcement in reinforced concrete bridge columns

Seismic vulnerability of timber bridges and timber substructures

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xvii, 176p

Place Hold on Seismic vulnerability of timber bridges and timber substructures

The Quindío, Colombia Earthquake of January 25, 1999

By Asfura, Alejandro P.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . x, 57p , This research was conducted at EQE International, Inc. and was supported in whole or in part by the National Science Foundation under Grant No. CMS 97-01471

Place Hold on The Quindío, Colombia Earthquake of January 25, 1999

Guide to remedial measures for liquefaction mitigation at existing highway bridge sites

By Kao, Andrew S.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 1999 . xvii, 162p B-21 , This research was conducted at Virginia Polytechnic Institute and State University and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106.

Place Hold on Guide to remedial measures for liquefaction mitigation at existing highway bridge sites

Design and retrofit methodology for building structures with supplemental energy dissipating systems

By Pekcan, Gokhan . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 1999 . xvii, 177p , This research was conducted at the University at Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. CMS 96-16624

Place Hold on Design and retrofit methodology for building structures with supplemental energy dissipating systems

Nonstructural damage database

By Kao, Andrew . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . xi, 59p , This research was conducted at the University at Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. CMS 97-01471.

Place Hold on Nonstructural damage database

Development and evaluation of simplified procedures for analysis and design of buildings with passive energy dissipation systems

Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . 490p , NICEE

Place Hold on Development and evaluation of simplified procedures for analysis and design of buildings with passive energy dissipation systems

Critical seismic issues for existing steel bridges

By Ritchie, P.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . various pagings , This research was conducted at Modjeski and Masters, Inc. and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106

Place Hold on Critical seismic issues for existing steel bridges

Property modification factors for seismic isolation bearings

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . xviii, 186p , This research was conducted at University at Buffalo, State university of New York and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106

Place Hold on Property modification factors for seismic isolation bearings

Experimental and analytical study of the XY-friction pendulum (XY-FP) bearing for bridge applications

By Marin-Artieda, Claudia C.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xx, 260p

Place Hold on Experimental and analytical study of the XY-friction pendulum (XY-FP) bearing for bridge applications

Design recommendations for perforated steel plate shear walls

By Purba, Ronny . New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xxv, 178p.

Place Hold on Design recommendations for perforated steel plate shear walls

Performance of seismic isolation hardware under service and seismic loading

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xxvii, 440p

Place Hold on Performance of seismic isolation hardware under service and seismic loading

Seismic reliability assessment of critical facilities

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . vii, 384p , This research was conducted at EQE International, Inc. and was supported in whole or in part by the National Science Foundation under Grant No. BCS 90-25010.

Place Hold on Seismic reliability assessment of critical facilities

Dynamic soil-foundation-structure interaction analyses of large caissons

Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . 69p , NICEE

Place Hold on Dynamic soil-foundation-structure interaction analyses of large caissons

Experimental evaluation of seismic performance of bridge restrainers

By Vlassis, Anastasios G.. Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . 143p , NICEE

Place Hold on Experimental evaluation of seismic performance of bridge restrainers

Restrainer design procedures for multi-span simply-supported bridges

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . vii, 384p , This research was conducted at the University of Nevada at Reno and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106

Place Hold on Restrainer design procedures for multi-span simply-supported bridges

Experimental evaluation of the seismic performance of hospital piping subassemblies

By Goodwin, Elliott R. . New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xv, 184p

Place Hold on Experimental evaluation of the seismic performance of hospital piping subassemblies

Effect of spatial variation of ground motion on highway structures

By Shinozuka, Masanobu. Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . 239p , NICEE

Place Hold on Effect of spatial variation of ground motion on highway structures

A risk-based methodology for assessing the seismic performance of highway systems

Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . 265p , NICEE

Place Hold on A risk-based methodology for assessing the seismic performance of highway systems

A simulation model of urban disaster recovery and resilience

By Miles, Scott B.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xv, 114p.

Place Hold on A simulation model of urban disaster recovery and resilience

Statistical analysis of fragility curves

Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2003 . 171p , NICEE

Place Hold on Statistical analysis of fragility curves

Experimental investigation of light-gauge steel plate shear walls for the seismic retrofit of buildings

By Berman, Jeffrey W. . Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2003 . 183p , NICEE

Place Hold on Experimental investigation of light-gauge steel plate shear walls for the seismic retrofit of buildings

Review of energy dissipation of compression members in concentrically braced frames

By Lee, Kangmin . Buffalo Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2002 . 195p , NICEE

Place Hold on Review of energy dissipation of compression members in concentrically braced frames

Statistical and mechanistic fragility analysis of concrete bridges

By Shinozuka, M. . New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xviii, 196p

Place Hold on Statistical and mechanistic fragility analysis of concrete bridges

Site factors and site categories in seismic codes

By Dobry, Ricardo. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, State University of New York 1999 . xv, 81p , This research was conducted at Rensselaer Polytechnic Institute and Geomatrix Consultants, Inc. and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106.

Place Hold on Site factors and site categories in seismic codes

Impact assessment of selected MCEER highway project research on the seismic design of highway structures

Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, State University of New York 1999 . xv, 134p , This research was conducted at the Applied Technology Council and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00112.

Place Hold on Impact assessment of selected MCEER highway project research on the seismic design of highway structures

Effect of vertical ground motions on the structural response of highway bridges

By Button, Martin R. . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, State University of New York 1999 . xix, 146p , This research was conducted at Dynamic Isolation Systems, Inc. and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00112.

Place Hold on Effect of vertical ground motions on the structural response of highway bridges

Experimental investigation and computational modeling of seismic response of a 1:4 scale model steel structure with a load balancing supplemental damping system

By Pekcan, Gokhan. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, State University of New York 1999 . xix, 146p , This research was conducted at the University at Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. CMS 96-16624.

Place Hold on Experimental investigation and computational modeling of seismic response of a 1:4 scale model steel structure with a load balancing supplemental damping system

Truss modeling of reinforced concrete shear-flexure behavior

By Kim, Jang Hoon. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, State University of New York 1999 . xvii, 191p , This research was conducted at the University at Buffalo, State University of New York and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00106.

Place Hold on Truss modeling of reinforced concrete shear-flexure behavior

Truss modeling of reinforced concrete shear-flexure behavior

By Kasalanti, Amarnath. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, State University of New York 1999 . xxi, 196p , This research was conducted at the University at Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. BCS 90-25010.

Place Hold on Truss modeling of reinforced concrete shear-flexure behavior

Response history analysis of structures with seismic isolation and energy dissipation systems

By Scheller, Joern . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, State University of New York 1999 . xv, 92p , This research was conducted at the University at Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. CMS 97-01471.

Place Hold on Response history analysis of structures with seismic isolation and energy dissipation systems

Seismic evaluation of a masonry infilled reinforced concrete frame by pseudodynamic testing

By Buonopane, Stephen. G.. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, State University of New York 1999 . xiv, 129p , This research was conducted at Cornell University and was supported in whole or in part by the National Science Foundation under Grant No. BCS 90-25010.

Place Hold on Seismic evaluation of a masonry infilled reinforced concrete frame by pseudodynamic testing

Experimental study of bridge elastomeric and other isolation and energy dissipation systems with emphasis on uplift prevention and high velocity near-source seismic excitation

By Kasalanti, Amarnath. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, State University of New York 1999 . xvii, 191p , This research was conducted at the University at Buffalo, State University of New York and was supported by the National Science Foundation under contract number BCS 90-25010.

Place Hold on Experimental study of bridge elastomeric and other isolation and energy dissipation systems with emphasis on uplift prevention and high velocity near-source seismic excitation

Performance estimates for seismically isolated bridges

By Warn, Gordon P.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2007 . xxi, 311p

Place Hold on Performance estimates for seismically isolated bridges

Remote sensing for resilient multi-hazard disaster response [vol.2]

By Gusella, Luca. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2008 . xv, 66p

Place Hold on Remote sensing for resilient multi-hazard disaster response [vol.2]

Remote sensing for resilient multi-hazard disaster response [vol.3]

By Adams, Beverley J.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2008 . xx, 142p

Place Hold on Remote sensing for resilient multi-hazard disaster response [vol.3]

Remote sensing for resilient multi-hazard disaster response [Vol.4]

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2008 . xv, 80p

Place Hold on Remote sensing for resilient multi-hazard disaster response [Vol.4]

Modal analysis of arbitrarily damped three-dimensional linear structures subjected to seismic excitations

By Chu, Yi-Lun. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2009 . xviii, 210p , Task number 094-D-1.2 FHWA Coontract number DTFH61-98-C-00094

Place Hold on Modal analysis of arbitrarily damped three-dimensional linear structures subjected to seismic excitations

Water supply performance during earthquakes and extreme events

By Bonneau, Amanda L. . New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2009 . xvii, 234p , Task number 10.1.2 NSF Master contract number EEC 9701471

Place Hold on Water supply performance during earthquakes and extreme events

A study of the coupled horizontal-vertical behavior of elastomeric and lead-rubber seismic isolation bearings

By Warn, Gordon. Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, The State University of New York 2006 . xxiv, 247p , This research was conducted at the University at Buffalo, State University of New York and was supported by the Federal Highway Administration under contract number DTFH61-98-C-00094.

Place Hold on A study of the coupled horizontal-vertical behavior of elastomeric and lead-rubber seismic isolation bearings

Enhancements to hospital resiliency

By Hess, Daniel B.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2009 . vii, 70p

Place Hold on Enhancements to hospital resiliency

Extraction of nonlinear hysteretic properties of seismically isolated bridges from quick-release field tests

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xv, 50p , Task number 106-F-4.3.1 (b) FHWA Contract number DTFH61-92-C-00106

Place Hold on Extraction of nonlinear hysteretic properties of seismically isolated bridges from quick-release field tests

Screening guide for rapid assessment of liquefaction hazard at highway bridge sites

By Youd, T. L.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xiii, 58p

Place Hold on Screening guide for rapid assessment of liquefaction hazard at highway bridge sites

Structural steel and steel/concrete interface details for bridges

By Ritchie, P. . New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xiii, 52p

Place Hold on Structural steel and steel/concrete interface details for bridges

Performance criteria for telecommunication services under earthquake conditions

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . vii, 104p , Task Number 92-1302B NSF Master Contract Number BCS 90-25010

Place Hold on Performance criteria for telecommunication services under earthquake conditions

Fatigue analysis of unconfined concrete columns

By Mander, J. B.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xvii, 146p , Task numbers 106-E-5.2 and 106-F-2.1 FHWA Contract Number DTFH61-92-C-00106

Place Hold on Fatigue analysis of unconfined concrete columns

Centrifuge modeling of cyclic lateral response of pile-cap systems and seat-type abutments in dry sands

By Gadre, Aniruddha D.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xxiv, 201p , Task number 112-D-3.2 FHWA Contract number DTFH61-92-C-00112

Place Hold on Centrifuge modeling of cyclic lateral response of pile-cap systems and seat-type abutments in dry sands

IDARC-BRIDGE

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xix, 274p , Task number 106-E-7.2.2 and 106-E-7.2.3 FHWA Contract number DTFH61-92-C-00106

Place Hold on IDARC-BRIDGE

Experimental investigation of the dynamic response of two bridges before and after retrofitting with elastomeric bearings

By Wendichansky, D. A.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xvii, 263p , Task number 106-F-4.3.1 (a) FHWA Contract number DTFH61-92-C-00106

Place Hold on Experimental investigation of the dynamic response of two bridges before and after retrofitting with elastomeric bearings

Design procedures for hinge restrainers and hinge seat width for multiple-frame bridges

By DesRoches, Reginald. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xxvii, 196p , Task number 106-F-3.1 (b) FHWA Contract number DTFH61-92-C-00106

Place Hold on Design procedures for hinge restrainers and hinge seat width for multiple-frame bridges

Response modification factors for seismically isolated bridges

By Constantinou, Michael C. . New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . various pagings , Task number 106-F-4.2.3 FHWA Contract number DTFH61-92-C-00106

Place Hold on Response modification factors for seismically isolated bridges

Seismic protective systems for bridges

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xi, 430p

Place Hold on Seismic protective systems for bridges

Appropriate seismic reliability for critical equipment systems

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xi, 104p

Place Hold on Appropriate seismic reliability for critical equipment systems

Civil infrastructure systems

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . ix, 258p

Place Hold on Civil infrastructure systems

Modeling of pile footings and drilled shafts for seismic design

By Polam, I.. New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 1998 . xvii, 117p

Place Hold on Modeling of pile footings and drilled shafts for seismic design

The Marmara, Turkey earthquake of August 17, 1999

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . xii, 190p , NICEE

Place Hold on The Marmara, Turkey earthquake of August 17, 1999

The Chi-Chi, Taiwan, earthquake of September 21, 1999

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . xi, 164p , NICEE

Place Hold on The Chi-Chi, Taiwan, earthquake of September 21, 1999

Seismic analysis and design of special bridges

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2004 . vi, 336p , NICEE

Place Hold on Seismic analysis and design of special bridges

Seismic analysis and design of special bridges

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2003 . vi, 281p , NICEE

Place Hold on Seismic analysis and design of special bridges

Seismic hazard mitigation of health care facilitities

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . vi, 127p , NICEE

Place Hold on Seismic hazard mitigation of health care facilitities

Mitigation of earthquake disaster by advanced technologies (MEDAT-1)

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2000 . ix, 259p , NICEE

Place Hold on Mitigation of earthquake disaster by advanced technologies (MEDAT-1)

Mitigation of earthquake disaster by advanced technologies (MEDAT-2)

New York Multidisciplinary Center for Earthquake Engineering Research (MCEER) 2001 . viii, 330p , NICEE

Place Hold on Mitigation of earthquake disaster by advanced technologies (MEDAT-2)

Hysteretic models for cyclic behavior of deteriorating inelastic structures

By Sivaselvan, M. V. . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo 1999 . various pagings , This research was conducted at the University of Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. CMS 97-01471 and other sponsors.

Place Hold on Hysteretic models for cyclic behavior of deteriorating inelastic structures

Hysteretic models for cyclic behavior of deteriorating Inelastic structures

By Sivaselvan, M. V. . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 1999 . various pagings , This research was conducted at the University of Buffalo, State University of New York and was supported in whole or in part by the National Science Foundation under Grant No. CMS 97-01471 and other sponsors.

Place Hold on Hysteretic models for cyclic behavior of deteriorating Inelastic structures

The performance-based design paradigm

By Astrella, Michael J. . Buffalo, New York Multidisciplinary Center for Earthquake Engineering Research, University of Buffalo 2005 . xv, 141p , This research was conducted at the University at Buffalo, State University of New York and was supported primarily by the Earthquake Engineering Research Centers Program of the National Science Foundation under award number EEC-9701471.

Place Hold on The performance-based design paradigm