PKK Library Search for 'au:"Hamrock,Bernard J"'

FUNDAMENTALS OF FLUID FILM LUBRICATION

By Hamrock,Bernard J,Schmid,Steven R. Marcel Dekker, New York 2004 . xiii,699 , Includes Biblographical References And Index 0824753712

Place Hold on FUNDAMENTALS OF FLUID FILM LUBRICATION

Fundamentals of machine elements

By Schmid, Steven R.. Boca Rotan Crc Press 2014 . xvi, 609p 9781482247480

Place Hold on Fundamentals of machine elements

NASA Technical Note: INCOMPRESSIBLY LUBRICATED RAYLEIGH STEP JOURNAL BEARING

By Hamrock, Bernard J.. Washington, D.C. NASA 1968 . 30p. , Technical Note D-4831-4840 | Bound Vol. No.101114 contents TR7567-7575

Place Hold on NASA Technical Note: INCOMPRESSIBLY LUBRICATED RAYLEIGH STEP JOURNAL BEARING

Predicted characteristics of an optimized series-hybrid conical hydrostatic ball bearing [NASA TN D-6607]

By Nypan,Lester J.. Washington, D.C. Nasa 1971 . 27p

Place Hold on Predicted characteristics of an optimized series-hybrid conical hydrostatic ball bearing [NASA TN D-6607]

ARCHED-OUTER-RACE BALL-BEARING ANALYSIS CONSIDERING CENTRIFUGAL FORCES

By Hamrock,Bernard J. Nasa, Washington, D.C. 1972 . 33 , Bound With Nasa Tn D-6760-6764,6766-6769

Place Hold on ARCHED-OUTER-RACE BALL-BEARING ANALYSIS CONSIDERING CENTRIFUGAL FORCES

OPTIMIZATION OF SELF-ACTING THRUST BEARINGS FOR LOAD CAPACITY AND STIFFNESS

By Hamrock,Bernard J. Nasa, Washington, D.C. 1970 . 28 , Bound With Nasa Tn D-5950-53,5955-59

Place Hold on OPTIMIZATION OF SELF-ACTING THRUST BEARINGS FOR LOAD CAPACITY AND STIFFNESS

BALL MOTION AND SLIDING FRICTION IN AN ARCHED OUTER-RACE BALL BEARING

By Hamrock,Bernard J. Nasa, Washington, D.C. 1974 . 44 , Bound With Nasa Tn D-7440-47

Place Hold on BALL MOTION AND SLIDING FRICTION IN AN ARCHED OUTER-RACE BALL BEARING

Arched-outer-race ball-bearing analysis considering centrifugal forces [TN D-6765]

By Hamrock, Bernard J.. Washington, D.C. National Aeronautics and Space Administration [NASA] 1972 . 33p , Bound with NASA TN D-6760-6769

Place Hold on Arched-outer-race ball-bearing analysis considering centrifugal forces [TN D-6765]

NASA Technical Note [D-6350-6356, 6358-6363, 6365-6368]

Washington National Aeronautics and Space Administration (NASA) 1971 , NASA Technical Note [D-6350]: Critical speeds of a rotor in rigidly mounted, externally pressurized, air-lubricated bearings/ by Robert E. Cunningham and Edward J.Gunter | NASA Technical Note [D-6351]: Optimization of self-acting herringbone journal bearings for maximum radial load capacity/ by Bernard J. Hamrock and David P. Fleming | NASA Technical Note [D-6352]: Effect of exit temperature sampling density on measured combustor performance/ Robert E. Jones | NASA Technical Note [D-6353]: Friction and wear of poly(amide-imide), polymide, and pyrrone polymers at 260 degree C(500 degree F) in dry air / by William R. Jones, Jr. , William F. Hady, and Robert L Johnson | NASA Technical Note [D-6354]: Resonance Tube ignition of Hydrozen- Oxygen mixture/ by Bert R. Phillips and Albert J. Pavli | NASA Technical Note [D-6355]: Comparison of simplex and dual-orifici fuel nozzles with ambient and heated fuel in an annular turbojet combustor/ by Donald F. Schultz, Jerrold D. Wear, and Porter J. Perkins | NASA Technical Note [D-6356]: Molecular dynamics of polar gas rotational relaxation/ by Frank J. Zeleznik, John V. Dugan, and Raymond W. Palmer | NASA Technical Note [D-6358]: Radiation-Induced prepration of antimony from solutions of antimony (III) chaloride in organic liquids/ by Warren H. Philipp and Stanley J. Marsik | NASA Technical Note [D-6359]: Influence of aluminum on Friction and wear of iron-aluminum alloys dry and lubricated/ by Donald H. Buckley | NASA Technical Note [D-6360]: Combustor liner film cooling in the presence of high free-stream turbulence/ Albert J. Juhasz and Cecil J. Marek | NASA Technical Note [D-6361]: Comparison of noncavitation and cavitation performance for 78 degree , 80.6 degree, and 84 degree helical inducers operated in Hydrogen/ Royce D Moore and Phillip R. Meng | NASA Technical Note [D-6362]: Shorting path mode of degradation in copper sulfide - cadmium sulfide thin-film solar cells/ by Larry R. Scudder, Michael P. Godlewski, John M. Bozek, and Thomas M. Klucher | NASA Technical Note [D-6363]: Friction and wear of sintered tungsten, molybdenum, and cobalt- molybdenum impregnated with a fluoride eutectic/ Harold E. Sliney and Robert L. Fusaro | NASA Technical Note [D-6365]:Utilization of halo orbits in advanced lunar operations/ Robert W. Farquhar | NASA Technical Note [D-6366]: Effect of surface films on deformation of Zinc single-crystal surface during sliding/ Donald H. Buckley | NASA Technical Note [D-6367]: Effect of contact angle on rolling-element fatigue life with a fluorinated ether lubricant at a cryogenic temperature of 170 K (305 degree R)/ by Marshall W. Dietrich, Dennis P. Townsend, and Erwin V. Zaretsky | NASA Technical Note [D-6368]: Gas-jet impingement normal to a liquid surface/ Thomas L. Labus and John C. Aydelott

Place Hold on NASA Technical Note [D-6350-6356, 6358-6363, 6365-6368]