PKK Library Search for 'au:"Hady,William F"'

NEW CIRCUMFERENTIAL SEAL DESIGN CONCEPT USING SELF-ACTING LIFT GEOMETRIES

By Hady,William F, Ludwig,Lawrence P. Nasa,Washington, D.C. 1972 . 10 , Bound With Nasa Tn D-6801-19

Place Hold on NEW CIRCUMFERENTIAL SEAL DESIGN CONCEPT USING SELF-ACTING LIFT GEOMETRIES

BOUNDARY LUBRICATION CHARACTERISTICS OF A TYPICAL BEARING STEEL IN LIQUID OXYGEN

By Hady,William F, Allen,Gordon P. Nasa, Washington, D.C. 1963 . 15 , Bound With Nasa Tn D-1571-90

Place Hold on BOUNDARY LUBRICATION CHARACTERISTICS OF A TYPICAL BEARING STEEL IN LIQUID OXYGEN

EFFECT OF HUMIDITY AND A WETTABILITY ADDITIVE ON POLYPHENYL ETHER BOUNDARY AIR AND NITRIGEN TO 350 DEGREE CELCIUS

By Jones,William R. Nasa, Washington, D.C. 1970 . 17 , Bound With Nasa Tn D-6040-54,6056-59

Place Hold on EFFECT OF HUMIDITY AND A WETTABILITY ADDITIVE ON POLYPHENYL ETHER BOUNDARY AIR AND NITRIGEN TO 350 DEGREE CELCIUS

BOUNDARY LUBRICATION AND THERMAL STABILITY STUDIES WITH FIVE LIQUID LUBRICANTS IN NITROGEN TO 400 (DEGRE) C

By Jones,William R. Nasa, Washington, D.C. 1971 . 17 , Bound With Nasa Tn D-6250-,6252-6269,Lack No. 6256,60

Place Hold on BOUNDARY LUBRICATION AND THERMAL STABILITY STUDIES WITH FIVE LIQUID LUBRICANTS IN NITROGEN TO 400 (DEGRE) C

BOUNDARY LUBRICATION OF FORMULATED C-ETHERS IN AIR TO 300 DEGREE CENTIGRATE

By Jones,William R. Nasa, Washington, D.C. 1972 . 18 , Bound With Nasa Tn D-6910-14,6916-19

Place Hold on BOUNDARY LUBRICATION OF FORMULATED C-ETHERS IN AIR TO 300 DEGREE CENTIGRATE

NASA Technical Note [D-6350-6356, 6358-6363, 6365-6368]

Washington National Aeronautics and Space Administration (NASA) 1971 , NASA Technical Note [D-6350]: Critical speeds of a rotor in rigidly mounted, externally pressurized, air-lubricated bearings/ by Robert E. Cunningham and Edward J.Gunter | NASA Technical Note [D-6351]: Optimization of self-acting herringbone journal bearings for maximum radial load capacity/ by Bernard J. Hamrock and David P. Fleming | NASA Technical Note [D-6352]: Effect of exit temperature sampling density on measured combustor performance/ Robert E. Jones | NASA Technical Note [D-6353]: Friction and wear of poly(amide-imide), polymide, and pyrrone polymers at 260 degree C(500 degree F) in dry air / by William R. Jones, Jr. , William F. Hady, and Robert L Johnson | NASA Technical Note [D-6354]: Resonance Tube ignition of Hydrozen- Oxygen mixture/ by Bert R. Phillips and Albert J. Pavli | NASA Technical Note [D-6355]: Comparison of simplex and dual-orifici fuel nozzles with ambient and heated fuel in an annular turbojet combustor/ by Donald F. Schultz, Jerrold D. Wear, and Porter J. Perkins | NASA Technical Note [D-6356]: Molecular dynamics of polar gas rotational relaxation/ by Frank J. Zeleznik, John V. Dugan, and Raymond W. Palmer | NASA Technical Note [D-6358]: Radiation-Induced prepration of antimony from solutions of antimony (III) chaloride in organic liquids/ by Warren H. Philipp and Stanley J. Marsik | NASA Technical Note [D-6359]: Influence of aluminum on Friction and wear of iron-aluminum alloys dry and lubricated/ by Donald H. Buckley | NASA Technical Note [D-6360]: Combustor liner film cooling in the presence of high free-stream turbulence/ Albert J. Juhasz and Cecil J. Marek | NASA Technical Note [D-6361]: Comparison of noncavitation and cavitation performance for 78 degree , 80.6 degree, and 84 degree helical inducers operated in Hydrogen/ Royce D Moore and Phillip R. Meng | NASA Technical Note [D-6362]: Shorting path mode of degradation in copper sulfide - cadmium sulfide thin-film solar cells/ by Larry R. Scudder, Michael P. Godlewski, John M. Bozek, and Thomas M. Klucher | NASA Technical Note [D-6363]: Friction and wear of sintered tungsten, molybdenum, and cobalt- molybdenum impregnated with a fluoride eutectic/ Harold E. Sliney and Robert L. Fusaro | NASA Technical Note [D-6365]:Utilization of halo orbits in advanced lunar operations/ Robert W. Farquhar | NASA Technical Note [D-6366]: Effect of surface films on deformation of Zinc single-crystal surface during sliding/ Donald H. Buckley | NASA Technical Note [D-6367]: Effect of contact angle on rolling-element fatigue life with a fluorinated ether lubricant at a cryogenic temperature of 170 K (305 degree R)/ by Marshall W. Dietrich, Dennis P. Townsend, and Erwin V. Zaretsky | NASA Technical Note [D-6368]: Gas-jet impingement normal to a liquid surface/ Thomas L. Labus and John C. Aydelott

Place Hold on NASA Technical Note [D-6350-6356, 6358-6363, 6365-6368]

NASA TN [D-5096]

By Jones, William R.. Washington National Aeronautics and Space Administration 1969 . 16p , Technical Note D-5081-99 Bound Vol. No.101138; Contents: TR9848-9865

Place Hold on NASA TN [D-5096]